1) Interior and exterior architectural details and millwork shall be manufactured of High Density Polyurethane as supplied by Chemcrest Inc.
2) Chemcrest Inc’s continuous improvement policy means that we may, without notice, change our designs at any time.

1) Product Data: Submit manufacturer’s descriptive literature, specifications, installation instructions and limited warranties.
2 )Warranty: Manufacturer’s Limited Lifetime Polyurethane Warranty is to be submitted.
3) Product Material Specifications: Obtain from the manufacturer for submission to the relevant building code authority.

1) Substitutions from the Chemcrest specified architectural details and building components will be allowed only with the express written consent of the Owner or Architect.

1) All interior and exterior products as supplied by Chemcrest Inc. will have an integral barrier coat, and a top coat primer for UV degradation resistance.
2) Any polyurethane products as supplied by Chemcrest Inc. are water resistant.
3) Any polyurethane products as supplied by Chemcrest Inc. are odour-free and are manufactured without CFC’s therefore do not harm the earth’s ozone layer.
4) Chemcrest Inc. supplied products resist the growth of mould and mildew, and are avoided by termites and other destructive insects, rodents, and organisms.
5) Chemcrest Inc. supplied products provide a greater insulating value (R value) than comparable wood products.

1) Chemcrest Inc. products should be shipped flat or on a wrapped skid as provided by Chemcrest Inc. Do not open or rearrange the shipments as they are stacked and packaged to prevent damages. Do not stack other products on top of Chemcrest Inc. products as this may cause internal or concealed damage.
2) Polyurethane products maintain the same physical characteristics as wood products. Therefore, when Chemcrest Inc. products are delivered to the job site, all items must be acclimatized. To acclimatize, unwrap the product 12 hours before installing and allow the product to remain in the exact same environment (temperature and humidity) as the installation location. This will allow the polyurethane product to expand or contract, adjusting to the current climate conditions, thereby preventing unwanted movement during installation.